Tugas I Jarkom3 Teori

Route Summarization

“Individual Route”.

Gb. Individual Route

Berikut settingan untuk Individual Route :

----------ROUTER0

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.18.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa1/0

Router(config-if)#ip add 172.19.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#exit

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s2/0

Router(config-if)#ip add 172.17.0.1 255.255.0.0

Router(config-if)#clock rate 9600

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#ip route 172.16.0.0 255.255.0.0 ser2/0

Router(config)#ip route 10.2.0.0 255.255.0.0 ser2/0

Router(config)#ip route 10.1.0.0 255.255.0.0 ser2/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#

----------ROUTER1

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.16.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s2/0

Router(config-if)#ip add 172.17.0.2 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#int s3/0

Router(config-if)#ip add 10.2.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 172.18.0.0 255.255.0.0 ser2/0

Router(config)#ip route 172.19.0.0 255.255.0.0 ser2/0

Router(config)#ip route 10.1.0.0 255.255.0.0 ser3/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#

----------ROUTER2

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 10.1.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s3/0

Router(config-if)#ip add 10.2.0.2 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 172.16.0.0 255.255.0.0 ser3/0

Router(config)#ip route 172.18.0.0 255.255.0.0 ser3/0

Router(config)#ip route 172.19.0.0 255.255.0.0 ser3/0

Router(config)#ip route 172.17.0.0 255.255.0.0 ser3/0

Router(config)#exit

%SYS-5-CONFIG_I: Configured from console by console

Router#

Nah… setelah itu mari kita lihat “Route Summarization” di bawah ini. Akan terlihat jelas dimana letak perbedaannya.

Gb. Route Summarization

Berikut settingan untuk Route Summarization :

----------ROUTER0

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.18.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa1/0

Router(config-if)#ip add 172.19.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#exit

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s2/0

Router(config-if)#ip add 172.17.0.1 255.255.0.0

Router(config-if)#clock rate 9600

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#ip route 172.16.0.0 255.255.0.0 ser2/0

Router(config)#ip route 10.0.0.0 255.252.0.0 ser2/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#

----------ROUTER1

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.16.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s2/0

Router(config-if)#ip add 172.17.0.2 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#int s3/0

Router(config-if)#ip add 10.2.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 10.1.0.0 255.255.0.0 Serial3/0

Router(config)#ip route 172.18.0.0 255.254.0.0 Serial2/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#

----------ROUTER2

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 10.1.0.1 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s3/0

Router(config-if)#ip add 10.2.0.2 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip route 172.16.0.0 255.252.0.0 ser3/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#

----------PEMBAHASAN----------

Route Summarization adalah cara memperkecil routing table sehingga membuat proses pencarian menjadi lebih efisien, karena lebih sedikit rute yang dicari.